Indoor Multi-fiber Cables
|
KEY TO GENERATE A PRODUCT CODE
| Code | Description |
| SC |
SC Connector |
| FC |
FC Connector |
| ST |
ST Connector |
| LC |
LC Connector |
| MU |
MU Connector |
| Code | Polish |
| U | UPC |
| U+ | UPC+ |
| A | APC |
| A+ | APC+ |
| P | PC |
| P+ | PC+ |
| Code | Fiber Count | Core/Clad (μm) |
Jacket | Description |
| F205 | 12 | 9/125 | 900 μm | Tight buffer |
| F411 | 24 | 50/125 | 900 μm | Tight buffer |
| F416 | 48 | 9/125 | 900 μm | Tight buffer |
| Any length |
| 10 m |
| 40 m |
| 100 m |
| (...) |
| Code | Description |
| E |
Indoor multi-fiber assemblies |
| Code | Description |
| XXX |
Custom description |
For further options, please consult our general Product Code.
To order or for any questions, call us at (450) 979-2275 or e-mail us.
Multi-fiber cable assemblies combine several individually sheathed optical fibers into a single assembly that can be easily routed from point-to-point. They are used for backbone and premise distribution cabling or for interconnect applications. O-m6 multi-fiber indoor cable assemblies are all custom-made with the best quality materials available. Cable and breakout can be ordered in any length and configured to fit your need.
- Singlemode or multimode cable with fiber count up to 144 fibers
- Most cable types available; Dielectric (Riser or Plenum), Armored, Breakout, etc.
- Fanout may have 900 μm or 2 mm sub-units
- Pulling eye option available for easier installation and routing
Specifications
| Parameter | Unit | U | U+ | A | A+ | P | P+ |
| Polish (Singlemode or Multimode) |
|
UPC (SM) |
UPC (SM) |
APC (SM) |
APC (SM) |
PC (MM) |
PC (MM) |
| Insertion loss (typical value) |
dB |
0,25 (0,12) |
0,20 (0,08) |
0,35 (0,20) |
0,30 (0,16) |
0,40 (0,20) |
0,30 (0,15) |
| Return loss (typical value) |
dB |
-55,0 (-58) |
-58,0 (-62) |
-65,0 (-68) |
-68,0 (-72) |
(-25) |
(-25) |
| Apex offset |
μm |
0-50 |
0-50 |
0-50 |
0-50 |
0-75 |
0-50 |
| Radius of curvature |
mm |
7-25 |
10-25* |
5-12 |
5-12 |
5-30 |
7-25 |
| Fiber height |
nm |
-50 |
+/-50 |
-50 |
+/-50 |
-75 |
-75 |
| Durability : IL < 0,7dB, RTL > nominal |
cycles |
More than 1000 |
More than 500 |
| Cable length tolerance |
% |
-0/+3 |
| Fanout length tolerance |
cm |
-0/+10 (tight tolerance available) |
*Depends on connector models.
| Cable (fiber count) | Fiber type | Diameter (mm) | Weight (kg/km) | S. Term Maximum Tensile Load (N) | L. Term Maximum Tensile Load (N) | S. Term Bending Radius (cm) | L. Term Bending Radius (cm) | Operating Temperature (°C) | Storage Temperature (°C) |
| F205 (12) |
SM 9/125 |
6.2 |
N/A |
1335 |
440 |
12.4 |
6.2 |
-20 to 70 |
-40 to 70 |
| F411 (24) |
MM 50/125 OM3 |
8.3 |
27.2 |
N/A |
N/A |
9.8 |
9.5 |
-20 to 85 |
-40 to 85 |
| F416 (48) |
MM 50/125 OM3 |
19.6 |
307 |
N/A |
N/A |
39.6 |
19.6 |
N/A |
N/A |
*Other cables are available.
- Lower insertion loss option available
- All connectors are visually inspected
- All connectors are tested at 850 nm (MM) and 1550 nm (SM), test data supplied
- + Series with geometrical qualification and dual wavelengths, test data supplied
All products can be customized to suit your specific applications.
|
